iPhone XS, XR, and above models have the ability to detect liquid in your charging port. If you’ve ever seen the Liquid Detected Notification on your iPhone, you know what we’re talking about. Below we’ll cover how you can fix it and get out of this situation. There’s also a possibility that your phone is showing this error even when there is no water, neither in the port nor on your charger or any lightning accessory. Unfortunately, many users have been plagued by this error. If you’re looking for a fix for this situation, you’ll also find these later in this article.
What Does the “Liquid Detected in Lightning Connector” Error Mean?
If you see the Liquid Detected error on your iPhone, it means that either there is water in the lightning port or the pin on your charging cable/ lightning accessory is wet. In this case, you’ll either see the Charging Not Available notification or Liquid Detected in Lightning Connector notification, depending on whether you connected your charger or some other lightning accessory. You shouldn’t use your lightning accessory or your charger if you get this error since the water can corrode the pins on the cable or in the port, permanently damaging them and rendering them completely useless or with bothersome connectivity issues. We know you might be thinking, “My phone’s supposed to be waterproof.” Well, it isn’t supposed to be waterproof but water-resistant. The water doesn’t damage the phone but it can still get inside it. Now, if you tap Dismiss on the pop-up and keep using your phone without plugging it in, there won’t be any problem. But trying to plug it in or using other accessories can cause damage and you should fix the issue before plugging it in. After all, water and electricity are never a good combination.
Charging the iPhone in an Emergency
You’ll notice that even when plugged in with the charger, iPhone won’t charge in this situation. iPhone doesn’t only show the Liquid Detected warning, but it also suspends the charging until your phone gets dry. But if it’s an emergency, there are certain ways you can charge your phone:
1. Use a Wireless Charger
If you have a wireless charger, you should always opt for using it instead of the standard lightning port and a charging cable in the case of a liquid detected warning. Even if there is water in the lightning port, charging your phone using the wireless charger will not damage your phone in any way. Before placing the phone on the charger, simply make sure that the back of your phone isn’t wet. Otherwise, completely dry it and then place it on a Qi-certified charger. Your phone will start charging after a few seconds. If your phone was submerged in water instead of the water getting in just the port, even wireless charging can potentially damage the phone. But if the water is only in the port, wireless charging is completely safe.
2. Use Emergency Override
If you don’t have a wireless charger, but still need to charge your phone, you can override the Liquid Detected warning and get your phone charging. Follow these steps:
- Tap Dismiss on the Liquid Detected/ Charging Not Available notification on your screen and unplug the charger.
- Then, plug it in again.
- The Charging Not Available notification will appear again, but this time around, it’ll have an option for Emergency Override. Tap it, and your iPhone will start charging again. However, we must warn you to only use the emergency override if it is a true emergency. There’s a solid chance of your phone getting damaged or even shorting when you use the emergency override to charge it while it’s wet. So, it all comes down to whether you consider the situation so urgent that you’re willing to let your phone get damaged. But if it’s not an emergency, refrain from charging your phone using the lightning port until you have fixed the error.
Fix Liquid Detected in Lightning Connector Error
It can be worrisome to get this error on your iPhone but there’s nothing to be worried about. Follow the instructions below and you’ll be rid of it without causing your phone any permanent damage.
1. Use Another Cable
When you see this error, it could be either due to the lightning port or the charging cable, or the lightning accessory. Our first goal is to determine the culprit.
- Unplug the charging cable or the lightning accessory immediately when you see the error.
- Then, try to connect another cable or lightning accessory. If you don’t get the error anymore, the culprit was the cable. The cable might have gotten into water or soda while you weren’t paying attention and caused all this ruckus.
- Even if the cable looked completely dry, water can get underneath the pins on the accessory. Do not plug it back in until it is completely dry. You can use a cloth to dry the pin or let it air dry; prefer the latter though so any microfibers or lint doesn’t get stuck to the pin. If you still got the error with another cable, the port on your phone is the culprit. Follow the next fix in this case.
2. Dry Your iPhone
When it comes to fixing the liquid detected error on your iPhone, there are some do’s and don’ts you should rigorously follow if you want to make sure that the water in the port doesn’t leave any permanent damage.
Do’s:
To dry your iPhone, tap it gently against your palm with the lightning connector facing down to expel any water. Or, simply leave it in a dry area that isn’t too humid and has some airflow. If you have desiccants lying around, leave them near your iPhone while it is drying.Try to connect the accessories after you have dried your phone for a few minutes, probably 30 minutes.After you try to connect the charger again, even if the alert doesn’t appear right away, wait for a couple of minutes to be completely sure. Your phone might initially start charging and you might be on your way to celebrate, but sometimes the alert reappears after a faux victory; trust me on this. If the alert reappears, follow the steps above and leave your phone in a dry area with airflow for an extended period of time. It can sometimes take your iPhone up to 24 hours to completely dry. You can try to connect your charger in the meanwhile after a few short intervals, but there’s a high probability of the alert appearing.
Don’ts:
In this situation, more important than the do’s are the don’ts as your phone will eventually dry but you want to make sure you don’t end up doing something that’ll damage it in the long run. When you see the Liquid Detected warning, don’t attempt any of the following:
Don’t use an external heat source, like a blow-dryer, or compressed heat to fasten the drying of your phone. The blow dryer can overheat your iPhone and it can even mess with the waterproof coating.You shouldn’t also blow air using your mouth to dry the port. Instinctively, it might feel like it’ll dry the port faster, but you might end up pushing the water even further instead of drying it.Using any foreign objects to try to dry the lightning port is a total no-go. Don’t use any cotton swabs or a paper towel to clean the port. If you insert these in the port, fibers from cotton or the paper towel can stay stuck in the port, creating connectivity issues in the future.Don’t put your phone in a bag or container of rice. Small particles of rice can get stuck in the lightning port or other parts of your phone damaging it in the process.
Fix False Liquid Detected in Lightning Connector Error
There’s a chance that even if your iPhone or your charging cable/ other lightning accessories haven’t been around water and you’re still getting this error. Fortunately, you aren’t the only one plagued by it and many users have faced it. So, the one silver lining is that we know exactly what to do to fix it.
1. Use Emergency Override
If you’re sure that it is a false error, the first step is to tap the Emergency Override button. If you’re lucky, it was just a fluke. The error will go away, and your phone will start charging as if nothing had happened. But in the event that the Emergency override doesn’t work, follow the fix below.
2. Check Your Charging Cables/ Accessory
Before moving on to the fix, it’s imperative to make sure that it isn’t a faulty cable that’s responsible for this chaos. If you get this error with a specific cable/ accessory every time, it might be damaged.
To make sure that the cable or accessory isn’t damaged, try connecting it to another iPhone. If it works, we can rule out this possibility.Otherwise, contact the manufacturer or replace the cable/ accessory.
3. Force Restart the iPhone
If the faulty cable wasn’t the reason, then it’s safe to say that it’s a software issue. In this case, force restart your iPhone. Follow the steps below to force restart it:
- Press the Volume Up button on your iPhone for a second and release it.
- Then, press the Volume Down button briefly and release it.
- Now, press the Lock/ Side button and keep pressing it.
- The option for ‘Slide to Power Off’ will appear. Ignore it and keep pressing the side button until the Apple Logo appears, and then release the button. Once your iPhone restarts, connect the charging cable and the Liquid Detected pop-up shouldn’t appear anymore.
Tips for Avoiding the False Liquid Detected Error
If you want to avoid getting this error falsely in the future, we’d recommend using genuine Apple cables. Somehow, you’re more likely to get this error when using charging cables from other manufacturers. We know it’s fishy, but it is what it is. You can also completely ditch the wired chargers and opt for MagSafe chargers instead.
Final Words
iPhones have been able to detect water in the port or the lightning cable for quite a few years. And honestly, it’s one of the best features that gives you a heads-up and prevents you from accidentally damaging your iPhone. But it can be very frustrating when you get this error for no reason. Fortunately, it’s easy to fix it.
Δ
